Center Certification & Testing International
<ul id="yy6ca"></ul> <del id="yy6ca"></del> 
Project Introduction
Mechanical shock test is a laboratory simulation product is a series of impacts in the working environment, the product function is normal, whether there is performance failure. In the actual storage, transportation and use of the product, there are various impact environments, such as braking during vehicle operation, impact caused by collision when the goods are moved, etc.
The technical indicators of the impact test include: peak acceleration, pulse duration, speed change (half sine wave, back peak sawtooth wave, trapezoidal wave) and waveform selection. The conventional mechanical impact test requires three impacts on each side, and the total number of impacts on the six sides is 18. Mechanical shock and crash tests can verify and determine the weak links of machinery and assess the integrity and reliability of product structures.
Mechanical shock generally generates a large acceleration and a short time, such as a mechanical collision in a natural environment. Mechanical shock may have a deleterious effect on the structural and functional integrity of the product. The types of mechanical shocks in the laboratory are divided into three types: half-sine, trapezoidal wave (square wave), and triangle wave (forward sawtooth wave and rearward sawtooth wave).
Method Standard
GB/T 2423.5 GB/T 2425.6 IEC 60068-2-27
testing fee
The cost of mechanical impact testing is related to the test market, and the longer the test time, the higher the cost.
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
Laboratory accreditation is a third-party certification that CNAS has the ability to perform specific testing and calibration work for testing and calibration laboratories.
Mechanical shock test is a laboratory simulation product is a series of impacts in the working environment, the product function is normal, whether there is performance failure. In the actual storage, transportation and use of the product, there are various impact environments, such as braking during vehicle operation, impact caused by collision when the goods are moved, etc.
Get a quote
Tik Tok
