Mobile phone charger, also known as mobile phone adapter, is composed of a stable power supply (mainly regulated power supply, providing stable working voltage and sufficient current) plus necessary control circuits such as constant current, voltage limiting, and time limiting. Mobile phone chargers can be roughly divided into travel chargers, cradle chargers and maintenance chargers. Generally, users are mainly contacted by the first two types, and the most popular ones on the market are travel chargers. However, in general, if these electronic products want to export into the EU market, they need to apply for CE certification.

What is CE certification?

The "CE" mark is a safety certification mark and is regarded as a passport for manufacturers to open and enter the European market. CE stands for Conformite Europeenne. In the EU market, the "CE" mark is a compulsory certification mark. Whether it is a product produced by an enterprise within the EU or a product produced in other countries, if it is to be freely circulated in the EU market, the "CE" mark must be affixed to indicate that the product is Comply with the basic requirements of the EU Directive on New Approaches to Technical Harmonization and Standardization. This is a mandatory requirement for products under EU law.

CE certification provides a unified technical specification for the trade of products from various countries in the European market and simplifies the trade procedure. To enter the European Union and the European Free Trade Area, the products of any country must be CE certified, and the CE mark should be affixed to the product. Therefore, CE certification is a passport for products to enter the European Union and European Free Trade Zone countries.

Mobile phone charger CE certification testing standards

Determine the test criteria based on the information provided

General mobile phone chargers apply for CE standards according to IT categories:

◆ EN55032 EN55035 (EMC)

◆ EN62368 (LVD)

Information to be prepared for EU CE certification application

1. The name and address of the manufacturer (the EU authorized representative (EU authorized agent) AR), the name and model of the product, etc.;

2. Product instruction manual;

3. Safety design documents (including key structural drawings, that is, design drawings that can reflect the creepage distance, clearance, number and thickness of insulating layers);

4. Product technical conditions (or enterprise standards), establish technical data;

5. Product electrical schematic diagram, block diagram and circuit diagram, etc.;

6. List of key components or raw materials (please choose products with European certification marks);

7. Testing Report;

8. Relevant certificates issued by the EU authorized certification body NB (for other modes other than Mode A);

9. The registration certificate of the product in the EU (for some products such as: Class I medical device, general IVD in vitro diagnostic medical device);

10. CE Declaration of Conformity (DOC)

Mobile phone charger CE certification process

1. Project application - submit an application to the supervision of the testing agency.

2. Data preparation - According to the standard requirements, the enterprise prepares the relevant certification documents.

3. Product testing - the company sends the samples to be tested to the laboratory for testing.

4. Preparation of reports - certified engineers prepare reports based on qualified test data.

5. Submit for review - the engineer will review the complete report.

6. Issuing the certificate - after the report is verified and correct, the report will be issued.

Please contact our company ZRLK for CE certification of mobile phone chargers. We will provide you with professional and efficient testing and certification services with favorable prices and considerate service. If you provide us with product pictures and specifications, we will give you corresponding cycles, quotations and specific solutions according to your products. You are welcome to inquire!