Electric fan, referred to as electric fan, is a household appliance that uses a motor to drive the fan blades to rotate to achieve accelerated circulation of air. It is mainly used for cooling and relieving heat and circulating air. Because electric fans are green, environmentally friendly and pollution-free, there is still a good consumer market and room for expansion in today's European and American markets. However, in general, if these electronic products want to export into the EU market, they need to apply for CE certification.

What is CE certification?

The "CE" mark is a safety certification mark and is regarded as a passport for manufacturers to open and enter the European market. CE stands for Conformite Europeenne. In the EU market, the "CE" mark is a compulsory certification mark. Whether it is a product produced by an enterprise within the EU or a product produced in other countries, if it is to be freely circulated in the EU market, the "CE" mark must be affixed to indicate that the product is Comply with the basic requirements of the EU Directive on New Approaches to Technical Harmonization and Standardization. This is a mandatory requirement for products under EU law.

CE certification provides a unified technical specification for the trade of products from various countries in the European market and simplifies the trade procedure. To enter the European Union and the European Free Trade Area, the products of any country must be CE certified, and the CE mark should be affixed to the product. Therefore, CE certification is a passport for products to enter the European Union and European Free Trade Zone countries.

The importance of applying for CE certification

1. Obtaining the CE certification certificate from the designated agency of the European Union can maximize the trust of consumers and market supervision agencies;

2. In the case of litigation, the CE certification certificate of the EU designated agency will become technical evidence with legal effect;

3. It can effectively avoid three major risks: (1) the risk of being detained and investigated by the customs; (2) the risk of being investigated and punished by the market supervision agency; (3) the risk of being accused by peers for competition purposes.

Electric fan CE certification test project

1. Dielectric strength and leakage current in wet state

2. Overload protection of transformers and related circuits

3. Fatigue test

4. Instability and mechanical damage test

5. Mechanical hazard test

6. Safety grounding rationality inspection

7. Inspection of the hazard of the appliance to the environment

Materials needed to apply for CE certification

1. The name and address of the manufacturer (the EU authorized representative (EU authorized agent) AR), the name and model of the product, etc.;

2. Product instruction manual;

3. Safety design documents (including key structural drawings, that is, design drawings that can reflect the creepage distance, clearance, number and thickness of insulating layers);

4. Product technical conditions (or enterprise standards), establish technical data;

5. Product electrical schematic diagram, block diagram and circuit diagram, etc.;

6. List of key components or raw materials (please choose products with European certification marks);

7. Testing Report;

8. Relevant certificates issued by the EU authorized certification body NB (for other modes other than Mode A);

9. The registration certificate of the product in the EU (for some products such as: Class I medical device, general IVD in vitro diagnostic medical device);

10. CE Declaration of Conformity (DOC);

Electric fan CE certification process

1. Project application - submit an application to the supervision of the testing agency.

2. Data preparation - According to the standard requirements, the enterprise prepares the relevant certification documents.

3. Product testing - the company sends the samples to be tested to the laboratory for testing.

4. Preparation of reports - certified engineers prepare reports based on qualified test data.

5. Submit for review - the engineer will review the complete report.

6. Issuing the certificate - after the report is verified and correct, the report will be issued.

Please contact our company ZRLK for CE certification of electric fans. We will provide you with professional and efficient testing and certification services with preferential prices and thoughtful service. If you provide us with product pictures and specifications, we will give you corresponding cycles, quotations and specific solutions according to your products. You are welcome to inquire!